How to avoid wear resistant ceramic lining falling off in the process of use:

1, wear-resistant ceramic lining in the application of adhesion to the surface of steel parts, steel parts are not handled well, some rust is not thorough enough, some surface is not smooth, in order to obtain good construction effect, steel parts to go through sandblasting pretreatment. Also in the steel surface with acetone wipe, so as to achieve a certain degreasing effect.

2. The ratio of wear-resistant ceramic glue is wrong. The ratio of different adhesives is not the same.

3. Wear-resistant ceramic glue is not wiped evenly, so it is easy to fall off where there is no adhesive or too little glue. After the completion of the construction of wear-resistant ceramic pieces, the rubber hammer should be gently knocked solid, and the construction surface should be smooth;

4, wear-resistant ceramic lining construction must be made clear before working temperature, wear-resistant ceramic tiles can be a red high temperature resistant, should choose different temperature heat resistance performance of different glue, otherwise easy to appear the phenomenon that falls off as temperature resistant ceramic tiles: suggest you, at the time of wear resistant ceramic construction must choose experienced construction team, Good wear-resistant ceramic construction can make the effect much better.